Introduction; Intended Use; Features; Package Contents - Parkside PAAS 12 A2 Originalbetriebsanleitung

CORDLESS GARDEN SAW
PAAS 12 A2

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, please familiar-
ise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
specified areas of application. Please also pass on
these operating instructions to any future owner.

Intended use

This appliance – standard designation: reciprocat-
ing saw – is intended for the sawing of wood,
plastics and building materials up to a fixed stop
(base plate). The appliance is suitable for rough
sawing work, straight and curved cuts; it cuts sur-
faces off flush. With the grip bracket mounted, the
appliance is suitable for sawing branches. Follow
the information concerning saw blades and prac-
tical advice on sawing. Any other uses of or modi-
fication to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for dam-
age(s) attributable to misuse. The appliance is not
intended for commercial use.

Features

Safety lock-out
Handle
Battery pack
Release (battery pack)
ON/OFF switch
Saw blade (SWISS MADE)
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed battery charger
Control LED (green)
Control LED (red)
Battery charge level display
│ GB │ MT
■ 44

Package contents

1 cordless garden saw PAAS 12 A2
1 high-speed battery charger PLGK 12 A2
1 battery pack PAPK 12 A1
1 grip bracket
1 saw blade for wood 152 mm/TPI 6
(SWISS MADE)
NOTE
► TPI = teeth per inch = the number of teeth per
2.54 cm
1 carrying case
1 set of operating instructions

Technical data

Cordless garden saw PAAS 12 A2
Rated voltage
Rated idle speed
Stroke length
Max. cutting performance
Battery pack PAPK 12 A2
Type
Rated voltage
Capacity
High-speed battery charger PLGK 12 A2
INPUT
Rated current
Rated power consumption
OUTPUT
Rated voltage
Rated current
Charging time
Fuse (internal)
Protection class
12 V (DC)
n 0–2700 rpm
0
20 mm
Wood 80 mm
LITHIUM ION
12 V (DC)
2.000 mAh/24 Wh
220–240 V ∼,
50–60 Hz
(alternating current)
50 W
12 V (DC)
2400 mA
approx. 60 min.
T2A
2 A
II /
(double insulation)
PAAS 12 A2