Working Procedures; Working With The Clamp; Working With A Tripod - Parkside PKLL 7 A1 Bedienungsanleitung

Working procedures

GB
IE
■ Use only the centre of the laser line to make your marking.
The width of the laser line changes with the distance.

Working with the clamp

With the help of the clamp
various items, e.g. vertical or horizontal boards or pipes.
♦
♦
♦
♦
♦
♦

Working with a tripod

A tripod offers a stable, height-adjustable support for taking measure-
ments.
♦
10
Downloaded from www.Manualslib.com
Undo the fixing screw
Position the clamp
the fixing screw
Now place the appliance with the tripod thread
screw and screw it tight with moderate force. Do not over-
tighten the appliance as it could be damaged.
Align the clamp to roughly the position you require before you
switch on the appliance.
To do this, undo the locking screw
to a horizontal position at the desired height.
Retighten the locking screw
Place the measuring tool with the tripod thread
screw of the tripod.
manuals search engine
you can attach the measuring tool to
.
in the desired location and then retighten
.
.
on the
and move the appliance
on the 1/4"
PKLL 7 A1