Selecting The Cutting Depth; Fitting The Rip Fence; Handling The Cordless Plunge Saw; Markings For Cutting Line - Parkside PTS 20-Li A1 Originalbetriebsanleitung

Selecting the cutting depth

NOTE
► We generally recommend setting the cutting
depth to approx. 2 mm more than the
thickness of the material. This ensures that you
achieve a clean cut.
♦ Let go of the quick-release lever of the cutting
depth preselector
depth on the scale
lever tight again.

Fitting the rip fence

♦ Loosen the screw for the rip fence
base plate . Insert the rip fence
rip fence slot . Retighten the screw for the
rip fence .

Handling the cordless plunge saw

1. Place the machine on the material. If necessary,
align the cordless plunge saw with the rip fence
or on a marked line.
2. Activate the safety lock-out
position. Press the ON/OFF switch
3. Push the cordless plunge saw downwards so
that the cordless plunge saw lowers onto the
material.
4. Saw by applying moderate pressure.
Types of saw blades
The supplied saw blade types cover the most
common applications.
HSS circular saw blade Z85/60
Description: ø 85 mm, 60 teeth
Suitable for: Soft wood and soft metals
HSS circular saw blade Z85/80
Description: ø 85 mm, 80 teeth
Suitable for: Soft wood and soft metals
│ GB │ IE
■ 34
. Set the desired cutting
. Clamp the quick-release
on the
into the
and hold it in
.
Diamond-coated cutting disc Z85
Description: ø 85 mm
Suitable for: Ceramics and stone
TCT saw blade Z85/30
Description: ø 85 mm, 30 teeth
Suitable for: Wood and plastic

Markings for cutting line

The viewing window for the cutting line helps you
accurately guide the machine along the cutting line
on the workpiece.
♦ For a true-to-size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line

Connecting a dust extraction unit

NOTE
► When working on wood for long periods of
time and especially when working on
materials that generate dust that is hazardous
to health, connect the unit to an external dust
extraction device suitable for the material.
► Check that the dust extraction appliance is
correctly attached.
► Also refer to the operating instructions for
the dust extraction appliance.
► Observe the applicable regulations in your
country regarding the materials you are
working on.
♦ Push the suction hose
tion connection
♦ Attach an approved dust and sawdust extractor
to the suction hose
onto the dust extrac-
and lock it in place.
.
PTS 20-Li A1
.