Product Specifications - Dell PowerConnect W-AP120 Serie Installationsanleitung

AP Configuration
Configuration parameters are network or controller specific and are configured and stored on the controller.
Network configuration settings are pushed out to the AP(s) but remain stored on the controller.
Configuration settings can be configured via the ArubaOS Web UI, ArubaOS CLI, or Aruba MMS. Refer to their
respective guides for further details: the ArubaOS User Guide.

Product Specifications

Mechanical
Dimensions (antenna stowed) (HxWxD):
4.9 inches x 5. 13 inches x 2 inches
12.4 cm x 13 cm x 5.1 cm
Weight: 15 oz/0.42 kg
Shipping Dimensions:
9.5 inches x 7.25 inches x 4.5 inches
24.1 cm x 18.4 cm x 11.4 cm
Temperature:
Operating: 0ºC to 50ºC (32ºF to 122ºF)
Storage: –10ºC to 70ºC (14ºF to 158ºF)
Note: During normal operation, the temperature of the base of the W-AP120 series can approach 80ºC (176ºF). This is within the
expected operating temperature range.
Relative Humidity: 5% to 95% non-condensing
Altitude: 8,000 ft @ 28ºC (82.4ºF)
Mounting: Wall, ceiling, or desktop mountable
Antennas:
3 integrated articulating dual-band antenna elements (W-AP121, W-AP125)
3 RP-SMA interfaces for external antennas (W-AP120, W-AP124)
Visual Status Indicators (LEDs): See
Electrical
Ethernet:
2 x 100/1000 Base-T auto-sensing Ethernet RJ-45 Interfaces
MDI/MDX
IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
Power over Ethernet (IEEE 802.3af compliant), 48V DC/350mA (see
Power:
5 VDC power interface, supports powering through an AC-to-DC mains electric power adapter
Note: If a power adapter other than the one provided by Dell is used in the US or Canada, it should be cULus (NRTL) Listed, with an
output rated 5 VDC, minimum 4A, marked "LPS" or "Class 2," and suitable for plugging into a standard power receptacle in the US
and Canada.
Dell PowerConnect W-AP120 Series AP | Installation Guide
Table 3
Table 1 for pin configuration)
9