Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
key
blender
blade assembly
a filler cap
b lid
a) plastic = locking lid
b) glass = push fit
c goblet
d sealing ring
e blade assembly
f power unit
g speed control + pulse
mill (if supplied)
h mill jar
i sealing ring (if supplied)
j blade assembly (if supplied)
k mill lid
Note: A separate blade assembly
for the mill will not be supplied with
all models, the sealing ring d and
i and blade assembly e and j
are identical and interchangeable.
to use your blender
1 Fit the sealing ring d into the
blade unit e - ensuring the seal
is located correctly in the grooved
area.
Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
2 Screw the blade assembly
onto the goblet 1. Refer to the
graphics on the underside of the
blade unit as follows:-
- unlocked position
- locked position
To ensure the blade assembly
is fully tightened check that the
on the goblet aligns with the
on the blade assembly. The
blender will not operate if
incorrectly assembled.
3 Put your ingredients into the
goblet.
4 Fit the filler cap to the lid.
a glass goblet - Fit the lid by
pushing down until secure.
b plastic goblet - Fit the lid
onto the goblet and turn clockwise
until it clicks.
5 Place the blender onto the power
unit and turn clockwise until it
clicks 2.
The appliance won't work
l
if the blender is incorrectly
fitted.
6 Select a speed (refer to the
recommended usage chart).
hints
To blend dry ingredients - cut into
l
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
The processing of spices is not
l
recommended as they may
damage the plastic parts.
When making mayonnaise, put all
l
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole
in the lid.
Thick mixtures, e.g. pâtés and dips,
l
may need scraping down. If the
mixture is difficult to process, add
more liquid.
to use your mill
1 Put your ingredients into the jar. Fill
it no more than half full.
2 Fit the sealing ring i into the
blade unit j - ensuring the seal
is located correctly in the grooved
area.
Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
3 Turn the mill blade assembly
upside down and screw onto the
mill jar 3. Refer to the graphics on
the underside of the blade unit as
follows:-
- unlocked position
- locked position
The mill will not operate if
incorrectly assembled.
4 Place the mill onto the power unit
and turn until it clicks 4.
5 Select a speed or use the pulse
control.
6 After milling, you can replace the
blade assembly with the mill lid.
5
(if supplied)
Werbung
Inhaltsverzeichnis
