General Power Tool Safety Warnings; Work Area Safety - Parkside PHKS 1350 C2 Originalbetriebsanleitung

Noise and vibration data
Noise measurement determined in accordance
with EN 62841. The A-rated noise level of the
tool is typically:
Noise emission value
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear protection!
Vibration emission value
Cutting wood
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
PHKS 1350 C2
L = 93 dB(A)
PA
K = 3 dB
PA
L = 104 dB(A)
WA
K = 3 dB
WA
Save all warnings and instructions for future
reference.
a = 3.7 m/s 2
h,W
The term „power tool" in the warnings refers to
K = 1.5 m/s 2
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
b) Do not operate power tools in explosive
c) Keep children and bystanders away while
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings, instructions, illust-
rations and specifications provided with this
power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury.
or dark areas invite accidents.
atmos pheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
operating a power tool. Distractions can cause
you to lose control.
GB │ MT │
45 ■