Gaskombinationsventile für automatische zündsysteme (28 Seiten)
Inhaltszusammenfassung für Honeywell BA298F
Seite 1
BA298F/BA298F-I Einbauanleitung • Installation instruction • Notice d'installation • Instrukcja montażu Systemtrenner Typ BA Anleitung zum späteren Gebrauch aufbewahren! Keep instructions for later use! BA type back flow preventers Conserver la notice pour usage ultérieur! Zachowa instrukcj do pózniejszego wykorzystania! Séparateur de réseau Modèle BA...
Ablaufrohranschluss DN 150 Anschlussgröße DN 65 - DN 150 5. Lieferumfang Der Systemtrenner besteht aus: • Gehäuse • Rückflussverhinderer ein- und ausgangsseitig • Ablassventil • 3 Kugelhähne zum Anschluss eines Differenzdruck- manometers MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
Seite 3
Bei Bedarf reinigen oder austauschen gerät TKA295 bzw. TK295 7. O-Ringe mit Unisilikon 250 oder ähnlichem gut einfetten, beschädigte O-Ringe austauschen 8. Montage in umgekehrter Reihenfolge 9. Funktion überprüfen (siehe Kapitel Inspektion) Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 4
Ablassventil ausbauen und reinigen oder ersetzen Beschädigter O-Ring Ablassventil ausbauen und O-Ring ersetzen Undichtes Ablassventil Ablassventil ausbauen und reinigen oder ersetzen Ablassventil öffnet nicht Verstopfte Drucksteuerleitung Drucksteuerleitung ausbauen und reinigen Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 5
Elektronisches Druckmessgerät mit Differenzdruckanzeige. Mit Koffer und Zubehör, ideal zur Inspektion Wartung der Systemtrenner BA. WBA-298Austauschwerkzeug für Rückflussverhin- derer WBA-298-100 für Anschlussgrößen DN 65 - WBA-298-150 für Anschlussgrößen DN 150 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
• The backflow preventer must be installed so that the Connection size DN 65 - DN 150 discharge valve is above the surrounding maximum water table.. Use and type of installation according to DIN EN 1717 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
1. Procedure according to instruction of the test control 7. Lubricate the ‘O’ ring well with grease, replace unit TKA295 resp. TK295 damaged ‘O’ rings 8. Reassemble in reverse order 9. Test function (see chapter inspection) Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 8
Remove discharge valve and replace ’o’ring Leaky discharge valve Remove discharge valve, clean or replace it Discharge valve don’t open Blocked pressure control pipe Remove control pipe and clean it Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 9
With case and accessories, ideal for inspec- tion and maintenance of backflow preventer type BA. WBA-298 Check valve replacement tool WBA-298-100 for connection sizes DN 65 - WBA-298-150 for connection size DN 150 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
DN 65 - DN 150 que la valve du vidange soit audessus de la ligne de raccordement remous d’exhausement locale. Utilisation et type de montage selon la norme DIN EN 1717 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
Seite 11
Si nécessaire, nettoyer ou changer 7. Graisser les joints toriques à la graisse Unisilikon 250 ou similaire 8. Montage dans l'ordre inverse 9. Contrôler le fonctionnement (voir chapitre Inspection) Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 12
Fuites à la soupape de vidange Démonter la valve et la nettoyer ou remplacer La valve de vidange n’ouvre pas onduite commande de pression Démonter la conduite de commande et engorgée nettoyer Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 13
BA. WBA-298Outil pour le changement de clapet anti- retour WBA-298-100 pour modèle bridé DN 65 à WBA-298-150 pour modèle bridé DN 150 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
Z futerałem i akcesoriami, idealny do przeprowadzania przeglądów i konserwacji zespołów odcinających BA. WBA-298Narzdzia do wymiany zespoBu odcinajcego WBA-298-100 dla wielko[ci przyBczy DN 65 - 100 WBA-298-150 dla wielko[ci przyBczy DN 150 MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
Seite 18
Honeywell GmbH MU1H-1218GE23 R0307 Downloaded from www.Manualslib.com manuals search engine...
Seite 19
MU1H-1218GE23 R0307 Honeywell GmbH Downloaded from www.Manualslib.com manuals search engine...
Seite 20
Automation and Control Solutions Honeywell GmbH Manufactured for and on behalf of the Environmental and Combustion Controls Division of Hardhofweg Honeywell Technologies Sàrl, Ecublens, Route du D-74821 Mosbach Bois 37, Switzerland by its Authorised Representative Honeywell GmbH Phone: (49) 6261 810...