Use; Setting The Humidity Alarm - ADE WS 1700 Bedienungsanleitung

2. Insert the batteries as shown on the base of
3. Close the battery compartment again.
Suggestions for changing the battery:
‚ A change of batteries is necessary when the
‚ Only use the type of battery that is specified
‚ Always exchange all of the batteries at the
‚ Dispose of batteries in an environmentally

Use

Setting the humidity alarm

1. Press the MODE button until a value and
2. Using the UP and DOWN buttons, set the
3. Press the MODE button again.
4. Using the UP and DOWN buttons, set the
Hygrometer WS 1700/1701
Downloaded from www.Manualslib.com
the battery compartment. Pay attention to
the correct polarity (+/-).
battery symbol or nothing at all is shown
on the display.
in the "Technical Data".
same time.
appropriate way (see "Disposal").
blink simultaneously on the display.
Additionally, "ALERT" will be displayed.
upper humidity limit (in 5% increments).
A value and
lower humidity limit (in 5% increments).
manuals search engine
blink on the display again.
41