Parkside PGSA 12 A1 Originalbetriebsanleitung Seite 9

tive safety measures reduce the risk of
starting the power tool accidentaIly.
d) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
5) USE AND TREATMENT OF THE
BATTERY-POWERED TOOL
a) Only recharge batteries using
chargers recommended by the
manufacturer. If a charger that has
been designed for a particular type of
battery is used to charge other batter-
ies, there is a risk of fire.
b) Only use the battery that is
intended in an electric tool. The
use of other batteries may create a fire
hazard and lead to injury.
c) When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other
small metal objects that could
cause the contacts to be bridged.
A short circuit between battery contacts
can result in burns or a fire.
d) When misused, fluid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the fluid comes into contact
with the eyes, also seek medi-
cal assistance. Leaking battery fluid
can cause skin irritation or burns.
e) Do not use damaged or altered
batteries. Damaged or altered bat-
teries can be unpredictable and lead
to fire, explosion or risk of injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered
tool outside the temperature
range stated in the instruction
manual. Incorrect charging or charg-
ing outside the permitted temperature
range may destroy the battery and
increase the risk of fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
IE NI
9