Operation; Attaching/Replacing Accessories; Switching On And Off; Checking The Charge Status Of The Battery - Parkside PGSA 12 A1 Originalbetriebsanleitung

IE NI
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant befo-
re operating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 12 V Team series. A
detailed description of
the charging process and
further information can
be found in the separate
operating instructions.

Operation

Keep to noise abatement regula-
tions and other by-laws.
Attaching/replacing
accessories
Switch off the device and
remove the rechargeable
battery before attaching or
12
replacing accessories in order
to avoid hazards and injury.
Attaching accessories
1. Put the grass cutting blade (12) or the
bush cutting blade (10) onto the plug-in
connector (14) on the bottom side of
the device head (1).
2. Press the accessory into the direction of
the device head (1).
It will lock into place audibly.
Removing accessories:
3. Press the release buttons (8) on the
device head (1) and remove the acces-
sories (10/12).

Switching on and off

1. If necessary, remove the blade guard
(9/11) before switching the device on.
2. To start the device, push the switch lock
(3) forwards and press the on/off switch
(5). Then release the switch lock (3).
The equipment runs at top speed.
3. In order to switch off, let go of the on/
off switch (5).
After switching the unit off,
the blades take a short time
to stop moving. Let the blades
come to a complete standstill.
Do not touch the blades or
slow them down before the
moving parts have come to a
standstill.
Checking the charge status
of the battery
The battery charge indicator (
lises the state of charge of the battery while
the device is operating.
Press and hold the power button (
view.
2) signa-
5) to