Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use - Conrad 75 21 68 Bedienungsanleitung

2-zonen alarmanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2. Intended Use

This compact 2-zone alarm system was specifically developed for small shops,
apartments and caravans.
This diverse 2 zone alarm system has two alarm zones (differential loops), an inte-
grated door bell and signalling device and a status LED where the operating status
can be comfortably read.
The two alarm zones differ in the alarm activation function. Alarm zone 1 triggers the
alarm immediately and without delay in case of alarm. Alarm zone 2 triggers the
alarm with a delay after the end of the entry delay.
Both alarm zones require an end of line resistor (EOL; included in the delivery). For
more information on this, see chapter: "7.1 Alarm Zones 1 and 2"
The integrated door bell can be activated with a conventional N.O. (normally open)
button that is connected to the connection terminals 9 and 10.
The alarm system can be armed during absence (AWAY), armed during presence
(HOME) or disarmed (OFF) with the "mode selection switch" on the front.
Furthermore, e.g. up to two 8 Ohm speakers (connection terminal 4 + 5), an optical or
acoustic signalling device (connection terminal 6 + 7; = N.O. relay contact) and an
external key switch, as well as an external status LED can be connected.
The operating voltage is connected to the terminal clamps 7 and 8 and can be 12 to
16 V/DC.
The alarm system is only suitable for dry indoor use.
Any use other than the intended use described above is not permitted and may
harm the product and result in short circuits, fire, etc. The entire product must not be
modified or converted. Always observe the safety instructions included in these
operating instructions. Please read the operating instructions carefully and keep
them for later reference.
24
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis