Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTINGS
1.
To modify some display parameters, select "SETTINGS" from the main menu by turning the "Functions" knob.
2.
Confirm by pressing the button
volume, display brightness, time of day, energy saving).
3.
Select the setting to be changed by turning the "Browse" knob.
4.
Press the button
5.
Follow the instructions on the display to modify the parameter.
6.
Press the button
NOTE: When the oven is switched off, if the ECOMODE (energy saving) function is selected (ON), the display switches off after a
few seconds. If, on the other hand, the function is not selected (OFF), after a few seconds the display is merely dimmed.
PURECLEAN™ CLEANING CYCLE
To keep the oven in best condition, carry out the PURECLEAN™ cleaning cycle after each use. The cycle takes 35 minutes,
including a cooling stage, and must be carried out as follows:
For the description of this function, see the section CLEANING and the functions table on pag. 32.
1.
Proceed with oven cold.
2.
Wet the cellulose cloth provided under running water and wring it out so that it does not drip.
3.
Open the oven door and remove the enamelled accessories.
4.
Cover the bottom of the oven completely with the cellulose cloth.
5.
Distribute 350 ml of water evenly on the cellulose cloth. A smaller or greater amount of water could compromise proper
functioning of the cycle.
6.
Close the oven door.
IMPORTANT: To prevent steam coming out, do not open the door during the cycle.
35 minutes water cleaning
7.
Select the symbol
8.
Press the button
door during the cycle.
9.
At the end of the cycle, remove the cellulose cloth and eliminate any residual water in the oven.
10. Then start cleaning using the sponge provided, moistened with hot water (cleaning could be compromised if delayed by
more than 15 minutes).
Particularly stubborn grime
To eliminate particularly stubborn grime, repeat the PURECLEAN™ cycle and add a few drops of neutral detergent while
removing the grime.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press the buttons
and the display shows a message and the icon
the above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In
this case, however, the previously selected function will have to be reset.
Downloaded from
www.Manualslib.com
: the display shows the parameters that can be modified (language, acoustic signal
to confirm.
; a message confirming the operation appears on the display.
1/1
Pureclean
Insert the cloth
& press
✓
with the Functions knob: the word PURECLEAN™ appears on the display.
to confirm the choice and start the cleaning cycle. To prevent steam coming out, do not open the
and
manuals search engine
Cleaning
together for at least 3 seconds. If activated, the functions of the buttons are locked
. This function can also be activated during cooking. To deactivate it, repeat
IT31
02:59
00:00
TIME
Cleaning
15:00
15:00
END TIME
END TIME
TIME
Werbung
Inhaltsverzeichnis
