Connecting Your Equipment; Determining The Speakers' Application - Pioneer SC-LX 75 Kurzanleitung

Connecting your equipment

02
Connecting your equipment
Connecting your equipment
This receiver provides you with many connection possibilities, but it doesn't have to be difficult. This
chapter explains the kinds of components you can connect to make up your home theater system.
CAUTION
! Before making or changing the connections,
switch off the power and disconnect the power
cord from the power outlet. Plugging in should
be the final step.
! When making connections, also keep the
power cords of the devices being connected
unplugged from the power outlets.
! Depending on the device being connected
(amplifier, receiver, etc.), the methods of
connection and terminal names may differ
from the explanations in this manual. Also
refer to the operating instructions of the
respective devices.
Important
Illustration shows the SC-LX85, however con-
nections for the SC-LX75 are the same except
where noted.
10
En
Determining the speakers'
application
This unit is equipped with speaker terminals for
9 channels, allowing users to select a variety of
speaker layouts/usage patterns according to
their tastes. The terminals to which the speak-
ers should be connected differ according to
the speaker layout/usage pattern. Select one
speaker layout/usage pattern before connecting
the speakers. For instructions on connections,
see Installing your speaker system on page 13.
! Be sure to connect speakers to the front left
and right channels (L and R).
! It is also possible to only connect one of the
surround back speakers (SB) or neither.
! If you have two subwoofers, the second
subwoofer can be connected to the
SUBWOOFER 2 terminal. Connecting two
subwoofers increases the bass sound to
achieve more powerful sound reproduction. In
this case, the same sound is output from the
two subwoofers.
Important
! The Speaker System setting must be made if
you use any of the connections shown below
other than [A] (see Speaker system setting on
Operating Instructions in CD-ROM).
! The speakers from which sound is output
can be switched according to the speaker
layout/usage pattern (sound is not necessarily
output from all connected speakers). Use
the SPEAKERS button to switch the speakers
from which sound is output. For details, see
Switching the speaker terminals on Operating
Instructions in CD-ROM.
[A] 9.2 channel surround system (Front
height/Front wide) connection
*Default setting
! Speaker System setting: 9.1ch FH/FW
FHR
FHL R
FWR
L
SW 1
SR
C
SW 2
FWL
SBR
SL
SBL
A 9.2 ch surround system connects the left and
right front speakers (L/R), the center speaker
(C), the left and right front height speakers
(FHL/FHR), the left and right front wide speak-
ers (FWL/FWR), the left and right surround
speakers (SL/SR), the left and right surround
back speakers (SBL/SBR), and the subwoofers
(SW 1/SW 2).
It is not possible to produce sound simultane-
ously from the front height speakers and the
front wide speakers.
This surround system produces a more true-to-
life sound from above.
The speakers from which sound is output can
be switched using the SPEAKERS button. For
details, see Switching the speaker terminals on
Operating Instructions in CD-ROM.
[B] 7.2 channel surround system & Speaker
B connection
! Speaker System setting: 7.1ch + Speaker B
FHR
FHL
R
L
SW 1
SR L
C
SW 2
SBR
SL
Speaker B
SBL
With these connections you can simultaneously
enjoy 7.2-channel surround sound in the main
zone with stereo playback of the same sound
on the B speakers. The same connections also
allow for 9.2-channel surround sound in the
main zone when not using the B speakers.
The speakers from which sound is output can
be switched using the SPEAKERS button. For
details, see Switching the speaker terminals on
Operating Instructions in CD-ROM.
[C] 7.2 channel surround system & Front
Bi-amping connection (High quality
surround)
! Speaker System setting: 7.1ch Front Bi-Amp
Bi-amping connection of the front speakers for
high sound quality with 7.2-channel surround
sound.
Front Bi-Amp
R
L
SW 1
SR
C
SW 2
SBR
SL
SBL
R