IKEA SMAKSAK AA-2048982-3 Bedienungsanleitung Seite 17

ENGLISH
Recommended core temperatures
50 °C
60 °C
70 °C
Caution! Only use the core
temperature sensor supplied with
the oven, or genuine
replacement parts.
1. Set the oven function and the oven
temperature. Press
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C. While
you can use the control knob to change
the default core temperature.
The display shows the symbol of the core
temperature sensor
core temperature.
Rare
Medium
Well done
.
flashes,
and the default
4. Press to save the new core
temperature, or wait 10 seconds for the
setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
core temperature flash. A signal sounds for
two minutes. The oven turns off
automatically.
5. Press any button or open the oven door
to stop the signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the oven.
Warning! Be careful when you
remove the tip and plug of the
core temperature sensor. The
core temperature sensor is hot.
There is a risk of burns.
The Duration
not operate with the core
temperature sensor.
You can change the core temperature at
any time during the cooking:
1. Press :
• one time - the display shows the set
core temperature which changes
every 5 seconds to the current core
temperature.
• two times - the display shows the
current oven temperature which
changes every 5 seconds to the set
oven temperature.
• three times - the display shows the
set oven temperature.
2. Use the control knob to change the
temperature.
17
and the default
and End do