Fakir HYPO CLEAN Benutzerhandbuch Seite 25

max
min
Fill the spray bottle with max.
400 ml of tap water (min.
200 ml).
Put the appliance in the body
(Standby Mode).
NOTE!:
Use general tap water at 5-35 °C. Do not use ground water, dirty or treated water. It is
extremely normal to get a slight chlorine smell during operation.
CAUTION!
To guarantee that the appliance works properly, the spray bottle must be on the
station.
NOTE!:
The operating options of your appliance are described in detail in the quick user
guide. You can operate your appliance with or without salt, depending on the area of
use and purpose. This process is an important feature to determine the areas of use
of the electrolyzed water.
Add a spoonfil of salt by using the orange
coloured measuring spoon. Attention must
be paid not to exceed 0.5 g salt.
the Start Button and select the
desired mode (you can turn off
the appliance by pressing the
button for 5 seconds)
25
After putting the spray head
on the water bottle, shake
the bottle for salt dissolution.
Once electrolyzed water
production is finished, you can
spray this water to the desired
spot. Attension! The spray bottle
must be used in upright postion.
EN