Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Blow Gun; Maintenance And Cleaning; Service Centre; Warranty - Parkside IAN 33355 Bedienungs- Und Sicherheitshinweise

Druckluft-zubehör-set
Vorschau ausblenden Andere Handbücher für IAN 33355:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
Bringing into use / Maintenance and cleaning / Service centre / Warranty
2. Press the trigger
3. Release the trigger
Read off the filling pressure on the gauge
4. If the object is overfilled with air (air pressure
too high): Press the deflator valve
some air.
5. Press the lever of the valve connector
wards and pull the valve connector
valve.
6. After you finish work, disconnect the device
from the compressor.
nOTE: First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.
Using accessories:
j
Press the lever of the valve connector
insert the desired accessory
cap
9
Presta valve, e.g. cycle tyre valve
Dunlop valve, traditional cycle tyre valve
TIP: Use the valve adapter
valves shown.
8
GB
Downloaded from
www.Manualslib.com
to start the delivery of air.
6
to stop the delivery of air.
6
10
to
into the valve connector
5
for the cycle tyre
13
manuals search engine

Using the blow gun

Q
.
1. Screw an extension nozzle
1
gun
to release
2. Press the trigger
3
3. Release the trigger
down-
4. After you finish work, disconnect the device
5
off the
from the compressor.
5
nOTE: First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.

Maintenance and cleaning

Q
J
DAngEr OF InJUrY! Always disconnect
and
the device from the compressed air source be-
5
13
or the
fore you clean or maintain it.
.
The device requires no maintenance.
J
Do not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
j
Clean the device frequently; for best results, do
this immediately after you have finished using it.
j
Clean the housing with a dry cloth.

Service centre

Q
J
WArnIng!
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.

Warranty

Q
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
8
.
7
to start the delivery of air.
6
to stop the delivery of air.
6
Have your device
7
on to the blow

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis