Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off; Overheating Protection; Solder Sponge; Soldering - Parkside PLS 48 A1 Bedienungs- Und Sicherheitshinweise

Regelbare lötstation
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 86
Setting 5 = 500 °C maximum soldering temperature, e.g. for desolder-

Switching off:

Note: After use always replace the soldering pencil
Press the ON / OFF switch
If the device is not being used, pull the mains lead out of the mains
socket.

Overheating protection:

This device has overheating protection. This is triggered by the device
reaching too high a temperature. The flow of current is interrupted. The
device switches off and the ON / OFF switch
The device is ready for use again after approximately 10 minutes. The
ON / OFF switch
©

Solder sponge

CAUTION! The hot soldering tip
contact with a dry solder sponge
may be damaged.
The solder sponge
Moisten the solder sponge
©

Soldering

— The soldering pencil has a rated output of 48 watts and is therefore
ideal for electronics soldering (see Figs. A, B).
— The design of the soldering pencil makes it especially suitable for
use where access is difficult or for fine soldering work.
Downloaded from
www.Manualslib.com
ing large soldered joints
light illuminates again.
2
is used to clean soldering tips.
5
manuals search engine
Using the product
into setting "0".
2
light ceases to illuminate.
2
must never be placed in
7
, otherwise the solder sponge
5
before you use it.
5
into the holder.
1
GB/CY
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis