Adjusting The Rack Posts (Optional) - Dell PowerEdge 4820 Installationsanleitung

Figure 1-13. Installing the Side Stabilizer Feet
1 side stabilizer foot (2 per side)
4 Use the provided bolts, washers, and cage nuts to secure each foot to
the rack as shown in Figure 1-13.

Adjusting the Rack Posts (optional)

The position of the rack posts can be adjusted to accommodate systems
of various depths.
1 Open the rack doors.
2 Remove the screws on the bottom, middle, and top of the post
(see Figure 1-14).
3 Move the post to the desired location inside the side of the rack, and
replace the screws in the corresponding holes.
26
Downloaded from www.Manualslib.com
Installation Guide
manuals search engine
1