Dell PowerEdge 4820 Installationsanleitung Seite 27

Figure 1-12. Installing the Front Stabilizer Feet
1
Installing the Side Stabilizer Feet
1 Remove the lower side panels (see "Removing the Lower Side Panels" on
2 On the side of the rack frame's bottom rail, locate the four holes
3 Position each stabilizer foot against the base of the rack frame and align its
Downloaded from www.Manualslib.com
1
front stabilizer foot (2)
page 13).
(see Figure 1-13).
holes with the corresponding holes in the frame.
manuals search engine
Installation Guide
25