Parkside HG04994 Bedienungs- Und Sicherheitshinweise Seite 98

NOTES:
The declared vibration total value and the declared noise emission
¾
value have been measured in accordance with a standard test
method and may be used for comparing one tool with another.
The declared total vibration value and the declared noise emission
¾
value may also be used for a preliminary assessment of exposure.
m
WARNING! The vibration and noise emissions during actual use of
the power tool can differ from the declared values depending on the
manner in which the tool is used, especially what kind of workpiece
is processed.
Try to minimise exposure to vibration and noise. Examples of
measures to reduce vibration include wearing gloves when using the
tool and limiting working time. All parts of the operating cycle must
be taken into account (e.g. times when the power tool is switched off
and when it is running idle in addition to the trigger time).
98 GB/MT