Troubleshooting Guide - Kenwood DF320 Serie Handbuch

Troubleshooting guide

Problem
Fryer does not work
Oil overflowing
Unpleasant Odour/Oil smokes
Poor Frying performance
Possible Cause
Fryer not plugged in
Fuse blown
Maximum oil level exceeded
Basket overloaded/maximum chip
capacity exceeded
Wet food placed in oil
The oil is old and has deteriorated
Incorrect oil used/different oils
mixed together
The oil is old and has deteriorated
The oil is not suitable for deep frying
Incorrect temperature used
Basket overloaded
Fresh chips too wet
5
Solution
Check fryer is plugged in
Check the fuse/circuit breaker
for your installation and replace
the fuse if necessary. If this does
not solve the problem refer to the
"service" section.
Check oil level
Refer to frying chart for
recommended quantities
Drain and dry food thoroughly
Replace with fresh oil
Use a good quality oil suitable
for deep frying
Replace with fresh oil
Use a good quality oil suitable
for deep frying
Select the correct temperature
Reduce the quantity fried
Drain and dry the chips thoroughly