Herunterladen Inhalt Inhalt Diese Seite drucken

Careful Handling And Use Of Electrical Power Tools; Service; Safety Notes For Paint And Mortar Mixer - Parkside PFMR 1400 B1 Bedienungs- Und Sicherheitshinweise

Farb- und mörtelrührer
Vorschau ausblenden Andere Handbücher für PFMR 1400 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 55
General safety advice for electrical ... / Safety notes for paint and mortar mixer
c) Avoid unintentional operation of the
device. Check that the electrical power
tool is switched off before you connect
it to the mains, pick it up or carry it.
Accidents can happen if you carry the device
with your finger on the ON / OFF switch or with
the device switched on.
d) Remove any setting tools or spanners
before you switch on the device. A tool
or spanner left attached to a rotating part of a
device can lead to injury.
e) Avoid placing your body in an unnat-
ural position. Keep proper footing and
balance at all times. By doing this, you will
be in a better position to control the electrical
power tool in unforeseen circumstances.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
g) If vacuum dust extraction and collection
devices are fitted, do not forget to check
that they are properly connected and
used correctly. The use of these devices re-
duces the hazard presented by dust.
4. Careful handling and use of
electrical power tools
a) Do not overload the device. Always use
an electrical power tool that is intended
for the task you are undertaking. By
using the right electrical power tool for the job,
you will work more safely and achieve a better
result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is laid aside. This precaution is
intended to prevent you from unintentionally
starting the device.
8
GB
d) Always ensure that electrical power
tools are kept out of reach of children
when not in use. Do not let anyone
use the device if he or she is not familiar
with it or has not read the instructions
and advice. Electrical power tools are dan-
gerous when they are used by inexperienced
people.
e) Maintain the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use the
device. Many accidents have their origins in
poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations for this particular type
of device. When doing this, take the
working conditions into consideration,
as well as the task at hand. The use of
electrical power tools for purposes other than
those intended can lead to dangerous situations.

5. Service

a) Have your device repaired at the ser-
vice centre or by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
Safety notes for paint and
mortar mixer
Hold the device by the insulated han-
dle surfaces when performing work
where there is danger of the applied

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis