Herunterladen Inhalt Inhalt Diese Seite drucken

Parkside PSHL 2 C1 Bedienungs- Und Sicherheitshinweise Seite 64

Automatik-schweißhelm
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 75
Safety instructions
Please do not expose this
z
product to unnecessary solar
radiation.
Please only use original spare
z
parts. The use of non-original
parts can cause problems with
regard to the protective func-
tion, serviceability and degree
of product protection.
Exceeding the service life
z
(insufficient protection) – please
check the protective glasses
prior to each use for damage
and durability.
Using eye protection without
z
the filter effect against radia-
tion (damages the eyes) – prior
to each use check whether
the eye protection exhibits the
necessary scale number.
Using the product against
z
splashes (insufficient protection)
– always check whether the
correct protective effect is
present.
Using the product for protection
z
against large dust particles
(injury, accident). The eye pro-
tection equipment must only be
used for the work described in
the operating instructions. Any
deviation from the instructions
in the operating instructions can
result in injuries or accidents.
64
GB/MT
Using damaged products
z
(insufficient protection) – prior
to each use check the protec-
tive glasses for damage and
durability.
Improper use of the eye protec-
z
tion (injury, accident). The eye
protection device must only be
used for the work described
in the operating instructions.
Any deviation from the instruc-
tions can result in injuries or
accidents.
This device may be used by chil-
z
dren aged 16 years and older,
and by persons with reduced
physical, sensory or mental
capacities, or a lack of expe-
rience and knowledge, if they
are supervised or have been
instructed in how to use the
device safely and understand
the dangers that may arise
when using it. Do not allow
children to play with the device.
Cleaning and day-to-day main-
tenance must not be performed
by children without supervision.
The welding helmet with
z
auto-darkening is not suitable
for laser and autogenous
welding.
Never place the welding
z
helmet on hot surfaces.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis