Power Tool Use And Care - Parkside PLPD 60 A1 Originalbetriebsanleitung

workpiece. The heat can
GB
IE
be emitted through the
NI
CY
workpiece.
Avoid contact between the
hot soldering tip and the
plastic parts of the multi-
functional holder. Otherwise,
the appliance might be
damaged.
In case of danger, remove
the plug from the socket
immediately.
CAUTION! RISK OF
POISONING! Avoid
inhaling vapours!
During work over an
extended period in which
hazardous vapours can
be created, always ensure
sufficient ventilation of the
workplace. In addition,
protective gloves, a face
mask and work apron are
recommended.
Avoid eating, drinking and
smoking in rooms where
soldering work is taking
6
place.
Otherwise, lead residues
on your hands might
contaminate the food or
cigarettes and be absorbed
into your body.
Always wash your hands
thoroughly after soldering.
Do not dispose of solder
waste in normal domestic
waste! Solder waste
should be disposed of with
hazardous waste.
4. Power tool use and
care
a) Store idle power
tools out of the reach
of children and do
not allow persons
unfamiliar with the
power tool or these
instructions to operate
the power tool. Power
tools are dangerous in the
hands of untrained users.