Sleep Timer; Using A Password (Av Mode Only); Entering A Password; Changing The Password - Pioneer PDP-505XDE Bedienungsanleitung

11 Useful Adjustment Settings

Sleep Timer

When the selected time elapses, the Sleep Timer automati-
cally places the system into the standby mode.
1
Press HOME MENU.
2
Select "Sleep Timer" ( /
3
Select the desired time ( /
• You can select from among "Off" (cancel),
"30 min", "60 min", "90 min", and "120 min".
4
Press HOME MENU to exit the menu.
• Five minutes before the selected time elapses, the remain-
ing time appears every minute.
• To check the remaining time, perform steps 1 and 2.

Using a password (AV mode only)

This system provides the Child Lock function for preventing
children from watching inappropriate programmes. You need
to enter a password when watching programmes with "Block"
specified. Before the system is shipped, "1234" is preset as
the factory-default password. You can however, change the
password as you want.
When using the Home menu you select "Auto Installation",
"Analogue TV Setup", "DTV Setup", or "Password", a screen
prompting password entry appears to prevent others from
changing the programme settings at their choices.

Entering a password

In a case where you select a channel blocked with Child Lock
or password entry is requested when attempting to open the
menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons
0 – 9.
Please Input Your Password.
• If you fail password entry three times, "Invalid password."
appears, and the menu is closed. In order to display the
password entry screen again to unlock the password,
select the blocked channel or open the menu again.
42
En
then ENTER).
then ENTER).

Changing the password

Use the following procedure to change the password.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Password" ( /
• The password entry screen appears. Enter the current
4-digit password using buttons 0 – 9.
4
Select "Change Password" ( /
Change Password
Please Input New Password.
Reconfirm New Password.
5
Enter a 4-digit password to be newly set, using buttons
0 – 9.
6
Enter the same password that you have entered in step
5.
• If an unmatching password is entered, the operation
goes back to step 5 for reentry from the beginning.
• If you fail password change three times by entering
unmatching passwords, the menu is closed.
7
Press HOME MENU to exit the menu.
• Take a note of the newly set password and keep it handy.
then ENTER).
then ENTER).