Basic Adjustment Settings; Setting Up Tv Channels Automatically; Using Auto Installation; Setting Up Analogue Tv Channels Manually - Pioneer PDP-505XDE Bedienungsanleitung

09

Basic Adjustment Settings

Setting up TV channels automatically

This section describes how to automatically search for and
set up TV channels.
For functions pertaining only to PDP-505XDE/435XDE, see
DTV operating instructions provided separately.

Using Auto Installation

When the Plasma Display System is switched on for the first
time after purchase, the initial auto installation is initiated.
You can automatically set language, country and channels in
successive operations.
1
Select "Language" ( / ).
2
Select a language (
Auto Installation
Language
Country
Tuner Type
Aerial Power
Installation
Example: PDP-505XDE/435XDE
• You can select from among 12 languages; English,
German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, and Turkish.
3
Select "Country" ( / ).
4
Select the country ( / ).
• Skip to step 9 if you are using PDP-505HDE or
PDP-435HDE series.
5
Select "Tuner Type" ( / ).
6
Select tuner type ( / ).
• You can select among 3 options; All, Digital, and
Analogue.
7
Select "Aerial Power" ( / ).
• Only selectable when "Digital" or "All" is selected for
"Tuner Type" in step 5. If not go to step 9.
8
Select "On" or "Off" ( / ).
9
Select "Installation" ( /
10
Select "Start" ( /
• Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
11
After Auto Installation has been finished, press
HOME MENU to exit the menu.
28
En
/
).
English
Austria
All
Off
Start
then ENTER).
then ENTER).
• You can start Auto Installation from the Home menu after
moving to another country, for example. Perform the
following steps 1 to 3 before starting Auto Installation.
1 Press HOME MENU.
2 Select "Setup" ( /
then ENTER).
3 Select "Auto Installation" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
Setting up analogue TV channels manu-
ally
This section describes how to set up analogue TV channels
manually.

Using Manual Adjust

Use Manual Adjust to set up analogue TV channels manually.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Manual Adjust" ( /
5
Select "Programme Entry" ( / ).
6
Select a programme number (
• You can select 1 through 99.
Manual Adjust
Programme Entry
Search
System
7
Select "Search" ( / ).
8
Enter a frequency using buttons 0 – 9 and ENTER.
/
• You can also press
Manual Adjust
Programme Entry
Search
System
then ENTER).
then ENTER).
then ENTER).
/
).
1
41.75MHz
B/G
to enter a frequency.
1
41.81MHz
B/G