Installing The Media Receiver Vertically - Pioneer PDP-505XDE Bedienungsanleitung

06 Preparation

Installing the Media Receiver vertically

You can use the supplied stand to install the Media Receiver
vertically.
1. Insert the stand into the side of the Media
Receiver.
Right side
2. Secure the stand with the supplied screws.
16
En
Screws
3. Remove the shock absorbing pads.
Shock absorbing pad
Keep the shock absorbing pads and screws. They are re-
quired when you place the Media Receiver in the horizontal
position.
4. Plug the screw holes using the supplied caps.
Remove the separation sheet.
Align with the
hole and attach.
Screw hole cap
• When you have installed the Media Receiver verti-
cally, be sure to use the supplied stand. If you place
the unit directly on the floor, the cooling vents will be
blocked, resulting in mechanical failure.