Introduction; Intended Use; Features; Package Contents - Parkside PSSA 20-Li A1 Originalbetriebsanleitung

CORDLESS SABRE SAW
PSSA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

This appliance is designed for sawing, cutting to
length and adapting wood, plastics, metal and
construction materials. The sabre saw is suitable for
rough sawing work, straight and curved cuts and
cuts off surfaces flush. Heed the information con-
cerning saw blades and practical advice on sawing.
Any other uses of or modifications to the machine
are deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts no
responsibility for damage(s) attributable to misuse.
This appliance is not intended for commercial use.

Features

Saw blade (SWISS MADE)
Footplate
Quick-release chuck
Pendulum stroke switch
Ventilation slits
Safety lock-out
ON/OFF switch
Handle
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
Locking lever for footplate
Red charge control LED
Green charge control LED
High-speed charger*
■ 16 │ GB │ IE

Package contents

1 cordless sabre saw PSSA 20-Li A1
1 saw blade for wood BIM 152.5 mm
(SWISS MADE)
1 carrying case
1 set of operating instructions

Technical data

Cordless sabre saw PSSA 20-Li A1
Rated voltage
Rated idle stroke speed
Stroke length
Max. cutting performance
Sawblade mounting
Battery PAP 20 A1*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 A1*
INPUT
Rated voltage
Rated power consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
20 V (DC)
n 0–3000 rpm
0
20 mm
Wood 100 mm
20 mm
(in non-alloyed steel)
½" (12.7 mm)
LITHIUM ION
20 V (DC)
2.0 Ah
5
230–240 V ∼, 50 Hz
(AC)
65 W
3.15 A
T3.15A
21.5 V (DC)
2.4 A
approx. 60 min
II /
(double insulation)
PSSA 20-Li A1