AUDIO INPUT CH1/2
XLR 3-pin, female (2)
LOW OFF: –60 dBu, high impedance,
HIGH OFF: +4 dBu, high impedance,
HIGH ON: +4 dBm, 600 Ω
AUDIO INPUT (AES/EBU) CH1/2, CH3/4
BNC (2)
Complies with AES-3id-1995
TIME CODE IN
XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 k Ω , balanced
HDV IN
6-pin, complies with IEEE 1394
Output connectors
HDSDI OUTPUT BNC (3 including 1 for character
Serial digital (1.485 Gbits/s)
SMPTE 292M
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
1.0 Vp-p, 75 Ω , Sync negative
SDI OUTPUT
BNC (3 including 1 for character
Serial digital (270 Mbits/s)
SMPTE 259M
AUDIO OUTPUT CH1/2
XLR 3-pin, male (2)
+4 dBm at 600 Ω load, low
AUDIO OUTPUT (AES/EBU) CH1/2, CH3/4, CH5/6,
BNC (4)
Complies with AES-3id-1995
(CH1/2 and CH3/4 only for HDW-
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600 Ω load, low
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES
JM-60 stereo phone jack
– ∞ to –12 dBu at 8 Ω load,
Remote connectors
CONTROL PANEL
20-pin, female (switch panel only)
REMOTE 1-IN(9P)
D-sub 9-pin, female
REMOTE 1-OUT(9P)
20
Specifications
balanced
balanced
termination, balanced
(option)
superimposition)
superimposition)
superimpositon)
impedance, balanced
CH7/8
1800)
impedance, balanced
unbalanced
D-sub 9-pin, female
RS232C
D-sub 9-pin, male
VIDEO CONTROL(9P)
D-sub 9-pin, female (for optional
HKDV-900)
REMOTE 2 PARALLEL I/O(50P)
50-pin, female
"Memory Stick" slot
"Memory Stick" (8 to 128 MB)
Accessories supplied
PSW 4 × 16 screws for rack mounting (4)
CD-ROM Manual (1)
Installation Manual (1)
Operation Guide (1)
Optional accessories
HKDW-104 Pull-down/720P Board
HKDW-105 i.LINK (HDV) Input Board
RCC-5G 9-pin Remote Control Cable
HKDV-900 Video Remote Controller
RMM-131 Rack Mount Adaptor
BCT-HD12CL Cleaning Cassette Tape
AC power cord
• For customers in the U.S.A. and Canada
Part No. 1-551-812-31
Plug holder 3-613-640-01
• For customers in the United Kingdom
Part No. 1-777-823-12
Plug holder 3-613-640-01
• For customers in European countries other than the
United Kingdom
Part No. 1-551-631-15
Plug holder 3-613-640-01
Design and specifications are subject to change without
notice.
To prevent electromagnetic interference from
portable communications devices
The use of portable telephones and other
communications devices near this unit can result in
misoperations and interference with audio and video
signals.
It is recommended that portable communications
devices near this unit be powered off.