Installation; Attaching The Protective Cover - Toolcraft Ras-200 Bedienungsanleitung

8. Installation

The grass trimmer must be installed before first use. To do this, follow the steps below.
• The grass trimmer is delivered with the following dismantled parts:
grass trimmer, auxiliary handle, protective cover, edge trimming wheel, 2x screws for edge trimming wheel, screw
for protective cover
a) Attaching the protective cover
• Attach the protective cover (9) to the trimmer head (12).
Fig. 1
Protective cover
Fig. 2
Insert the tabs of
the protective cover here
30
Screw hole
Tabs
Cutting blade
Insert the tabs of the protective
cover here