Safety Precautions; Symbols Used In The Manual; Risk Of Burns; Symbols On The Implement - Parkside PGK 1400 A1 Originalbetriebsanleitung

GB IE NI
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety precautions

This section deals with the basic safety regu-
lations while working with the electric tiller.

Symbols used in the manual

Warning symbols with
information on damage
and injury prevention.

Risk of burns!

Instruction symbols with infor-
mation on preventing damage.
Unplug the machine.
Wear protective gloves when
carrying out maintenance
and cleaning work on the
tool to avoid injury from cuts.
Help symbols with informa-
tion on improving tool han-
dling.

Symbols on the implement

Caution!
Read the user manual.
6
CY
Caution! Protect from rain
and damp.
Wear safety gloves.
Wear safety shoes.
Wear safety goggles.
Danger of injury from ob-
jects spinning off! Keep
surrounding persons away
form the hazard area.
Caution! Switch off the tool
and disconnect it from the
mains before carrying out
any cleaning or mainte-
nance work.
Danger from damaged
mains cable! Keep mains
cables away from tines.
Danger of injury from rotat-
ing parts. The tines will con-
tinue to rotate after the tool
has been switched off. Wait
for them to stop moving.
Run direction
L
Sound power level L
WA
dB
Safety class II
(Double insulation)
Do not dispose of electrical
equipment in household waste.
Plug for indoor use only
in dB
WA