General description
The major functional parts are
shown on the foldout page.
Scope of delivery
Carefully remove the tool from the packag-
ing and check that the following parts are
complete:
•
Appliance
•
Cable clamp
•
Instructions for use
Functional description
Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The tool is fi tted with four rotating tine
wheels that automatically dig themselves
into the ground.
The aluminium frame can be folded to aid
storage.
Please refer to the following descriptions
for the function of the controls.
Overview
1 Handlebar
A
2 Mains connection cable
3 Central bar
4 Lower bar
5 Chassis
6 Wheel
7 Chopper
8 Gears
9 Engine housing
10 Cable clamp
11 Screw, quick-release lever, washer
13 Release button
C
14 Start handle
GB
15 Bolt with securing clip
16 Drive shaft
17 Nut (self-securing),
hexagonal bolt
18 Chassis lock
19 Transport position
20 Working position
Technical data
Tiller ...................................PGK 1400 A1
Motor power input (P) ................ 1400 W
Rated input voltage (U) .....230 V~, 50 Hz
Idling speed (n
) ........................400 min
0
Safety class ......................................
Degree of protection .................IPX4
Working width .....................max. 40 cm
Max working depth ...............max. 20 cm
Number of tine wheels ..........................4
Weight (m) ................................ 13.7 kg
Acoustic pressure level
(L
) ............... 83.4 dB(A), K
pA
Sound power level (L
Measured .. 89.01 dB(A), K
Guaranteed ........................... 93 dB(A)
Vibration at hand grip (a
* Plug for indoor use only
Noise and vibration values have
been determined according to the
standards and regulations named in the
declaration of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
IE
NI
CY
= 2.5 dB
pA
)
WA
= 1.64 dB
WA
) ..... 2.525 m/s
h
K = 1.5 m/s
-1
II
*
2
2
5