Daily Use; Automatic Switch-Off; The Heat Setting - Electrolux EQT6540BOG Benutzerinformation

44 www.electrolux.com
Display
+ digit
/
3.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
residual heat!

4. DAILY USE

4.1 On and Off
Touch
appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All roasting zones are deactivated
• You do not set the temperature after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). The
sound operates some time and the ap-
pliance deactivates. Remove the object
or clean the control panel.
• You do not deactivate a roasting zone
or change the temperature. After 90 mi-
nutes
deactivates. Before next use, set the
roasting zone to

4.3 The heat setting

Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting. The dis-
play shows the heat setting.
There is a malfunction.
3 step residual heat indicator: continue cooking / keep
/
warm / residual heat.
The Lock / The Child Safety Device operates.
The Automatic Switch-Off operates.
\ \ Risk of burns from
for 1 second to start or stop the
comes on and the appliance
.
Description
OptiHeat Control indicates the level of the
residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cookware.
The glass ceramic is heated by the heat of
the cookware.
If you set the temperature, the display
.
flashes until the roasting zone reaches the
temperature. Then a signal sounds and
the display shows the temperature.
4.4 The Timer
The Count Down Timer.
Use the Count Down Timer to set how
long the roasting zone operates for only
this one time.
Set the Count Down Timer after the
selection of the roasting zone.
The selection of Timer function is
possible for roasting zones that
are active and the heat setting is
set.
• To set the roasting zone: touch
again and again until the indicator of a
necessary roasting zone comes on.
When this function is activated,
comes on.