Transport; Storage; Disposal/Environmental Protection; Spare Parts/Accessories - Parkside PGK 1400 A1 Originalbetriebsanleitung

marked on the appliance
housing with an arrow.
5. Slide the hexagonal bolt (17)
through the hole situated close
to the gears (8) and screw in a
new self-securing nut (contained
within the delivery scope of a
new chopper).
6. Slide the bolt (15) through the
outer hole and fasten in place us-
ing the safety clip.
Mount the bolt's safety clip
( 15) in such a way that it
closes against the travel of
direction of the chopper.

Transport

The appliance features one transport
position and three working positions.
1. Firmly hold the appliance with one
hand on the central bar (3).
2. To change the position, release the lock
on the chassis by pulling on the ring (18).
3. Select the transport position (19).
4. To start work, switch to one of the
working positions (20).

Spare Parts/Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 57).
Set of tines Right/left ...................................................................... Order No. 91105174
Bolt with securing clip .............................................................................. 91105175
Wheel (x2) ............................................................................................. 91105172
Quick-release lever .................................................................................. 91105171

Storage

• Leave the motor to cool down before
you put the tool into a closed space.
• Keep the tool clean, dry and out of the
reach of children.
• Do not cover the tool in plastic bags as
moisture may form.
Loosen the quick-release lever (11)
and fold the handlebars together as
illustrated.
Make sure that the cable does not
become jammed.
Do not use the tool
with the handle folded
closed. There is a risk of
injury!
Disposal, environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have fi nished with them.
Do not dispose of electrical appli-
ances in household waste.
Return the tool to a recycling centre. The
plastic and metal parts used can be sepa-
rated and sorted for recycling. Ask our
service centre for details.
GB MT
55