General Description; Scope Of Delivery; Functional Description; Overview - Parkside PGK 1400 A1 Originalbetriebsanleitung

General description

The major functional parts are
shown on the foldout page.

Scope of delivery

Carefully remove the tool from the packag-
ing and check that the following parts are
complete:
• Appliance
• Cable clamp
• Instructions for use

Functional description

Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The tool is fi tted with four rotating tine
wheels that automatically dig themselves
into the ground.
The aluminium frame can be folded to aid
storage.
Please refer to the following descriptions
for the function of the controls.

Overview

1 Handlebar
A
2 Mains connection cable
3 Central bar
4 Lower bar
5 Chassis
6 Wheel
7 Chopper
8 Gears
9 Engine housing
10 Cable clamp
11 Screw, quick-release lever, washer
12 Strain relief
C
13 Release button
14 Start handle
15 Bolt with securing clip
16 Drive shaft
17 Nut (self-securing),
hexagonal bolt
18 Chassis lock
19 Transport position
20 Working position

Technical data

Tiller ...................................PGK 1400 A1
Motor power input (P) ................ 1400 W
Rated input voltage (U) .....230 V~, 50 Hz
) ........................400 min
Idling speed (n
0
Safety class ......................................
Degree of protection .........................IPX4
Working width .....................max. 40 cm
Max working depth ...............max. 20 cm
Number of tine wheels ..........................4
Weight (m) ................................ 12.3 kg
Acoustic pressure level
) ............... 83.4 dB(A), K
(L
pA
Sound power level (L
Measured .. 89.01 dB(A), K
Guaranteed ........................... 93 dB(A)
Vibration at hand grip (a
Noise and vibration values have been
determined according to the standards and
regulations named in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
GB MT
= 2.5 dB
pA
)
WA
= 1.64 dB
WA
) ..... 2.525 m/s
h
K = 1.5 m/s
-1
II
2
2
47