General Power Tool Safety Warnings; Work Area Safety - Parkside PMTS 180 A1 Originalbetriebsanleitung

Working speed
of the cutting disc:
Cutting disc diameter: Ø 180 mm
Cutting disc thickness: 1.6 mm
Inclined cuts:
max. cut depth:
50mm
Protection class:
Noise emission value:
Noise measurement value determined in accor-
dance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
PMTS 180 A1
max. 80 m / s
0° – 45°
50 mm at 0°
mitre angle
II / (double insulation)
L = 93 dB(A)
PA
K = 3 dB
PA
L = 106 dB (A)
WA
K = 3 dB
WA
WARNING!
► Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the val-
ues given in these instructions. Regular use of
the power tool in this way may cause the user
to underestimate the vibration. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein
all states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings, instructions, illust-
rations and specifications provided with this
power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
GB │ MT │
45 ■