Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Placement options
Desktop placement
Place the GX1026 switch on a flat and stable surface. Ensure that the location
meets the operating environmental specifications. See page 3 for details.
The length of the UTP Category 5 cable length cannot exceed 100 meters (328
feet).
Mounting the switch on a 19-inch rack
You can mount the GX1026 switch on a rack with the supplied mounting brackets
and screws.
To mount the switch on a rack:
1.
Locate three screw holes on both sides of the switch.
2.
Align the mounting brackets with the switch screw holes.
3.
Secure the mounting brackets with three screws supplied in the mounting kit
on both sides of the switch.
4.
Place the switch in a 19-inch rack, then secure both sides with four rack
mount screws.
The rack mount screws are not supplied.
Quick Start Guide
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
