Belt Pouch; Error, Faults & Troubleshooting - Parkside PLEM 50 A1 Bedienungs- Und Sicherheitshinweise

number will also be disappeared from the "memory location
number row"

Belt pouch

Use the supplied belt pouch to protect the device when not in use.
Error, faults & troubleshooting
Faults Cause
204 Calculation error
220 Low battery
255 Received signal too
weak or measure-
ment time too long
256 Received signal too
strong
261 Out of measuring
range
.
19
Solution
Refer to user manual,
repeat the procedures.
Replace batteries or charge
the batteries.
Improve the reflective surface.
(Use target plate, white paper)
Improve the reflective surface.
(Use target plate, or don't aim
at strong light)
Measuring the distance within
measurement range.
GB/MT 109