Introduction; Intended Use - Parkside PEBH 1010 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
Drill chuck, Made In Germany
W
Watts (Effective power)
n
Rated idle running speed
0
V ~
Voltage
Keep children away from electrical
power tools!
Safety class II
Pneumatic hammer drill with
chiselling action PEBH 1010
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. Further details can be found in the operating
instructions. Keep these instructions in a safe place.
If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.
26 GB/MT
Device function selector switch
Chiselling
Hammer drilling
Drilling
Chisel position adjuster
Adjusting the chisel position
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Protect electrical power tools from
moisture!
Check that the device, mains lead
and plug are in good condition!
Dispose packaging and appliance in
an environmentally-friendly way!

Intended Use

Q
The PEBH 1010 hammer drill is suitable for:
- hammer drilling in bricks, concrete and
natural stone
- drilling in wood, plastic and metal
- screwing in wood, plastic and metal
- chiselling in concrete, stone and plaster
Any other use of or changes to the device is consid-
ered to be inappropriate and harbours a consider-
able danger of accidents.
The manufacturer does not accept liability for damage
or losses occurring as a result of the device being
used for purposes other than those stated above.
The device is not intended for commercial use.