Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area Safety - Parkside PTSS 1200 C2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PTSS 1200 C2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Sawing wood
Uncertainty
NOTE
The vibration emission value and noise
emission levels specified in these instructions
have been measured in accordance with the
standardised testing procedure specified and
can be used to make equipment comparisons.
The specified vibration emission value and
the noise emission values can also be used to
make an initial load estimate.
WARNING!
Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the
values given in these instructions. Regular use
of the power tool in this way may cause the
user to underestimate the vibration. Try to
keep the vibration loads as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
PTSS 1200 C2
L
= 89 dB (A)
PA
K
= 3 dB
PA
L
= 100 dB (A)
WA
K
= 3 dB
WA
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
a
= 1.3 m/s
2
h,W
mains-operated (corded) power tool or battery-
K = 1.5 m/s
2
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmos-
c) Keep children and bystanders away while
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Cluttered or dark areas invite accidents.
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
operating a power tool. Distractions can
cause you to lose control.
GB │ IE 
│ 
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis