Intended Use; Initial Use; Operation - Beko CHP5554W Bedienungsanleitung

Usage
3

3.1 Intended use

This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping small
amounts of solid food only.

3.2 Initial use

Clean the appliance parts before
initial use (see 4.1).

3.3 Operation

1. Place your appliance on a hard
and flat surface.
2. Remove the
Operating unit (1) and the mid-
dle cover (2) from the plastic
container.
3. Place the lower cutter blade (5)
on the plastic container (3) by
holding its plastic side and then
place the upper cutter blade (4)
on the fixed shaft of the lower
blade.
4. Put the ingredients you want to
prepare into the plastic contain-
er (3) (see. 3.4).
10 / EN
Motor body/
5. After placing the middle cover
(2) onto the plastic container (3)
in a way that the rubber gasket
is facing down, place the Motor
body/Operating unit (1) on top.
WARNING: Make
sure that the middle
cover (2) is fully
seated onto the plas-
A
tic
Otherwise, the Motor
Body/Operating Unit
(1) will not be seated
securely and the ap-
pliance will not start.
6. Plug in the appliance.
7. Press the operating unit accord-
ing to the processing duration
(see 3.4).
Each press on
the Motor Body/
Operating Unit (1)
C
that lasts 1 to 2 sec-
onds is a "PULSE".
"PULSE" is a function.
Thanks to this func-
tion, you get better
blending results.
Chopper / User Manual
container (2).