Introduction; Intended Utilisation; Operating Elements; Items Supplied - Parkside XQ90 Bedienungs- Und Sicherheitshinweise

Introduction

The following icons / symbols are used in this instruction manual:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Dangerous electric current – danger
to life!
Explosive material!
n
Rated idle running speed
0
W
Watts (Effective power)
V ~
Voltage
Waxer / polisher
Wax application, buffing and wax remo-
val from vehicle finishes
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools cor-
rectly. Further details can be found in the operating
instructions. Keep these instructions in a safe place.
If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.

Intended Utilisation

Q
This appliance is intended exclusively for the waxing
and buffing / polishing of paint finishes applied to
vehicles, boats and caravans / campervans. Use
the appliance only as described and only for the
areas of application specified. Any other use of,
and modification to, the appliance is deemed to be
6 GB
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children and other unauthorised
personnel at a safe distance when
using electrical tools.
Keep the device away from rain or
moisture. Water entering an electrical
device increases the risk of electric shock.
Damaged appliances, power cables
and power plugs mean potentially fatal
risks from electric shock. Regularly
check the condition of the appliance,
the power cables and the power plugs.
Dispose packaging and appliance in
an environmentally-friendly way!
improper usage and may result in serious physical
injury. The manufacturer declines to accept respon-
sibility for damage(s) arising out of usage contrary
to the instructions specified below.
The appliance is not intended for commercial use.

Operating elements

Q
Hand grips
1
Buffing plate
2
On / OFF switch
3
Mains connection lead
4
Terrycloth bonnets
5
Synthetic polishing bonnets
6

Items supplied

Q
1 Waxer / polisher
2 Terrycloth bonnets
2 Synthetic polishing bonnets
1 Operating manual
1 Booklet "Warranty and Service"