Herunterladen Diese Seite drucken

Asus SDRW-08D2S-U Schnellinstallationsanleitung Seite 19

External slim optical drive
Vorschau ausblenden Andere Handbücher für SDRW-08D2S-U:

Werbung

Safely remove the external optical drive.
4
The external optical drive supports Plug & Play. Follow the steps below to safely remove the
drive.
A.From the task bar of your computer, click the Safely Remove Hardware icon (
B.When a message Safely remove USB Mass Storage Device pops up, click the message.
C.When a message The device can now be safely removed from the computer pops up,
disconnect the USB Y cable from your computer.
NOTE: DO NOT disconnect the USB Y cable when the system is booting up or the LED indicator of the external
optical drive is
Français
Retirer le lecteur optique en toute sécurité.
Le lecteur optique externe supporte la norme Plug & Play. Suivez
les étapes ci-dessous pour retirer le lecteur en toute sécurité.
A. Dans la zone de
B. Lorsque le message Retirer le périphérique en toute
sécurité apparaît, cliquez sur le message.
C. Lorsque le message Le matériel peut être retiré en
toute sécurité apparaît, déconnectez le câble USB Y
de votre ordinateur.
REMARQUE: NE déconnectez PAS le câble USB Y lors du
démarrage du système ou lorsque le voyant DEL du lecteur
optique clignote.
Italiano
Rimuovere in modo sicuro l'unità ottica esterna.
L'unità ottica esterna supporta la funzionalità Plug&Play.
Per rimuovere in modo sicuro l'unità seguire le istruzioni
riportate di seguito.
A. Dalla barra delle attività del computer, fare clic sull'icona
Rimozione sicura dell'hardware
B. Quando viene visualizzato il messaggio Rimozione
sicura dispositivo di archiviazione di massa USB
fare clic sul messaggio.
C. Quando viene visualizzato il messaggio È ora possibile
rimuovere il dispositivo da computer in modo sicuro
scollegare il cavo USB a Y dal computer.
NOTA: NON scollegare il cavo USB a Y durante l'avvio del
sistema o se l'indicatore LED dell'unità ottica esterna lampeggia.
Русский
Безопасное отключение внешнего оптического
привода.
Внешний оптический привод поддерживает Plug & Play. Для
отключения устройства выполнит е след ующие инструкции:
A. В панели задач вашего компьютера нажмите иконку
Safely Remove Hardware (
B. При появлении сообщени я Safely remove USB Mass
Storage Device нажмите на это сообщение.
C. Когда появится сообщение The device can now be safely
removed from the computer отключите USB Y кабель от
компьютера.
Примечание: Никогда не отключайте USB Y при загрузке
системы или мигании индикатора на внешнем оптическом
приводе.
cliquez sur l'icône (
).
(
).
,
,
).
Deutsch
Externes optisches Laufwerk sicher entfernen.
Das externe optische Laufwerk unterstützt Plug & Play. Folgen
Sie den Schritten, um das Laufwerk sicher zu entfernen.
A. Klicken Sie in der Taskleiste auf das Symbol USB Mass
Storage Device - Laufwerk (E:) entfernen
B. Wenn die Nachricht Hardware sicher entfernen
erscheint, klicken Sie auf die Nachricht.
C. Wenn eine Nachricht Hardware kann jetzt entfernt
werden erscheint, ziehen Sie das USB Y-Kabel aus
Ihren Computer.
HINWEIS: Ziehen Sie das USB Y-Kabel nicht aus Ihren
Computer heraus, wenn das System hochgefahren wird
oder die LED-Anzeige des externen optischen Laufwerks
blinkt.
Español
Extraer la unidad óptica externa con seguridad.
La unidad óptica externa es compatible con Plug & Play. Siga los
pasos siguientes para extraer la unidad con seguridad.
A. Desde la barra de tareas de su equipo, haga clic en el
icono Quitar hardware de forma segura
B. Cuando aparezca el mensaje Quitar dispositivo de
almacenamiento masivo USB de forma segura
en él.
C. Si aparece el mensaje Ahora se puede quitar el
dispositivo de forma segura del equipo
cable USB en Y del equipo.
NOTA: NO desconecte el cable USB en Y si el sistema se está
iniciando o el indicador LED de la unidad óptica externa está
parpadeando.
Български
Безопасно премахване на външното оптично
устройство.
Външното оптично устройство поддържа Plug & Play.
Следвайте стъпките по-долу, за да премахнете устройството.
A. От лентата със задачи на Вашия компютър, натиснете
иконата Безопасно премахване на хардуер (
B. Когато се отвори съобщение то Безопасно премахване
на USB устройство за съхранение на данни натиснете
съобщението.
C. Когато се появи съобщение Сега това устройство
може безопасно да бъде отстранено от компютъра,
изключете USB Y кабела от компютъра.
ЗАБЕЛЕЖКА: НЕ изваждайте USB Y кабела докато системата
се зарежда или индик аторът на външното оптично устройство
мига.
).
(
).
(
).
, haga clic
, desconecte el
).

Werbung

loading