Herunterladen Inhalt Inhalt Diese Seite drucken

Changing The Attached Tool; Place A Sanding Sheet On The Backing Plate; Vacuum Extraction Of Dust / Debris; Connecting A Vacuum Dust Extraction Device - Parkside PMFW 200 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 75
Materials:
Wood, paint
Use:
·
Sanding at edges and in difficult to access areas

Changing the attached tool

Q
J
WArNING!
Pull the mains plug out of the mains
socket before you carry out any task
on the electrical power tool.
j
Remove any tool already inserted. To do this,
release the screw
and take off the tool.
j
Place the tool (e.g. plunge saw blade
the tool mount
NoTE: You can place the tool in any of the
possible positions on the tool mount
j
Fasten the tool in place with the screw and
washer
. Tighten the crew
6
key
.
8
J
Check that the tool is firmly seated.
Incorrectly or insecurely attached tools could
become lose during use and injure you.
Place a sanding sheet
Q
on the backing plate
j
Offer up the sanding sheet
one side of the backing plate
the sanding sheet to the backing plate.
Vacuum extraction of
Q
dust / debris
Do not use the tool on materials containing asbestos.
Asbestos is a known carcinogen.
WArNING!
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
26050_Multifunktionswerkzeug_Content_LB4.indd 11
DANGEr oF INJUrY!
using the Allen key
6
.
5
5
using the Allen
6
to fit flushly on
9
, then apply
10
DANGEr oF FIrE! There is
uum's dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device's dust collection box and the vacuum clean-
er's dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
8
j
Always use vacuum dust extraction.
j
) on
Ensure that your working area is well ventilated.
7
j
Observe the regulations applicable in your
country for the materials you are working on.
.
Connecting a vacuum
Q
dust extraction device
j
Always connect a vacuum dust extraction de-
vice when you are sanding.
Connection:
j
Push the adapter for external vacuum extrac-
tion
12
necessary to use the reducer piece
the reducer piece into the adapter for external
vacuum extraction
j
Push the hose of a suitable dust extraction de
vice approved for that purpose (e.g. a work-
shop vacuum cleaner) on to the adapter for
external vacuum extraction
piece
13
removal:
j
Pull the hose of the dust extraction device off
the adapter for external vacuum extraction
j
Pull off the adapter for external vacuum extrac-
tion
12
on to the dust extraction port
.
12
or the reducer
12
.
(with the reducer piece
Assembly
. If it is
3
, push
13
.
12
if used).
13
GB
11
24.03.09 14:20

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis