Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha DVD-S2700 Bedienungsanleitung Seite 42

Dvd audio/video sa-cd player
Vorschau ausblenden Andere Handbücher für DVD-S2700:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 90
TROUBLESHOOTING
Problem
No sound or distorted sound
No audio at digital output
No audio at HDMI output
Disc does not play
Picture freezes momentarily
during playback
This unit does not respond to
the remote control
Buttons do not work
This unit does not respond to
some operating commands
during playback
Menu items cannot be selected
No sound during DivX movies
playback
38
En
Adjust the volume.
Check that the speakers are connected properly.
Adjust the volume level in the setup menu.
Check the digital connections.
If you are playing a DTS source, check that your receiver can decode
DTS and [Digital Out] is set to [All]
If you are playing an MPEG-2 source, check that your receiver can
decode MPEG-2. Otherwise, make sure that [Digital Out] is set to
[PCM].
Check that the audio format of the selected audio language matches
your receiver capabilities.
Make sure that [HDMI Audio] is set to [Auto] or [PCM].
No audio signals via the HDMI jack are output if the DVI-D
component is connected to this unit using the HDMI-DVI converter
cable.
To output audio signals via the HDMI jack, connect an HDMI
component to this unit.
The CD-R/RW, DVD+R/RW and DVD-R/RW must be finalized.
Check that the disc label is facing up.
Check that the disc is defective by trying another disc.
If you have recorded a JPEG, MP3 or WMA disc yourself, check that
your disc contains at least ten JPEG picture files or five MP3/WMA
music tracks.
Check the region code.
Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from the center to the edge.
Aim the remote control directly at the remote control sensor on the
front panel.
Reduce the distance of the remote control from this unit.
Replace the batteries in the remote control.
Reinsert the batteries with their polarities (+/– signs) as indicated.
Disconnect the power cable from the AC outlet for a few minutes.
Reconnect the power cable and try to operate again as usual.
Operations may not be permitted by the disc. Refer to the instructions
of the disc jacket.
Depending on the connection status or disc availability, some menu
items cannot be selected.
The audio code may not be supported by this unit.
Solution
.
See
page
30
11
28
28
35
12
16
3
4
13
13
13
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis