C: Misfeed In The Transport Area - Sharp AR-122E Bedienungsanleitung

2
Gently remove the misfed paper
from under the fusing unit as
shown in the illustration. If the
paper cannot be removed, proceed
to "C: Misfeed in the transport
area".
The fusing unit is hot. Do not
touch the fusing unit when
removing misfed paper. Doing
so may cause a burn or other
injury.
• Do not touch the photoconductive drum (green portion) when
• Do not remove the misfed paper from above the fusing unit.
3
Raise the fusing unit release lever and then close the side
cover by pressing the round projections near the side cover
open button. The misfeed (
( ) indicator will light up.

C: Misfeed in the transport area

1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.29).
2
Open the front cover.
To open the front cover, see "TONER CARTRIDGE REPLACEMENT"
(p.21).
3
Rotate the feeding roller in
the direction of the arrow
and gently remove the
misfed paper from the exit
area.
removing the misfed paper. Doing so may cause smudges on
copies.
Unfixed toner on the paper may stain the paper transport
area, resulting in smudges on copies.
) indicator will go out and the start
Feeding roller
6
30