Set The Copy Quantity; Exposure Adjustment/Photo Copying - Sharp AR-122E Bedienungsanleitung

SET THE COPY QUANTITY

Set the number of copies using the two copy quantity (
from the original table.
• Press the clear (
• A single copy can be made with the initial setting, i.e., when "0" is
displayed.
• Press the right copy quantity key to set the unit digit
from 0 to 9. This key will not change the tens digit.
• Press the left copy quantity key to set the tens digit
from 1 to 9.

EXPOSURE ADJUSTMENT/PHOTO COPYING

Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in 2 steps manually.
The copy resolution used for AUTO and MANUAL (
changed. (p.19)
1
Press the exposure mode selector key to
select the MANUAL (
PHOTO (
2
Use the light (
adjust the exposure level. If exposure level
2 is selected, the two left-handmost
indicators for that level will light up
simultaneously. Also, if level 4 is selected,
the two right-handmost indicators for that
level will light up simultaneously.
) key to clear an entry if a mistake is made.
) mode or
) mode.
) and dark (
, ) keys when copying
Tens digit
) keys to
Unit digit
) mode can be
3
15