Herunterladen Diese Seite drucken

Working With The Equipment; Fitting - Parkside PFR 28 A2 Originalbetriebsanleitung

Vorschau ausblenden



Working with the equipment

CAUTION. pressure wash-
ers can be dangerous if they
are not operated correctly!
The jet must never be direct-
ed at people, animals, elec-
tric equipment con-nected to
the power supply or against
the actual pressure washer.
Do not direct the jet at yourself or others
in order to clean clothes and shoes.
Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
Do not start the high-pressure wash un-
til the patio cleaner rests on the surface
you are cleaning.
Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running.
Dispose of the packaging material cor-
Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
Store the equipment in a dry place and
out of reach of children.
Children should be supervised to en-
sure that they do not play with the ap-
Follow the security tips of your high-
pressure washer.
The operator or user is responsible for
any accidents or personal injury and/
or material damage to third parties or
their property.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
Do not use for cleaning windows.
Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the ap-
proval of the manufacturer.
Protect the patio cleaner from frost
Use only original accessories and do
not carry out conversion work on the


Connection without adapter
1. Screw the connection pipe (5)
into the pivoting connector (6).
2. To extend your reach, snap on
and turn the bayonet mount of
the pipe extension (4) to the con-
nection pipe (5).
3. To connect to the
pressure washer, snap the
bayonet mount into the
PARKSIDE-pressure washer's jet
4. When you use the extension ele-
ment (4) screw the retainer nut (3)
against the spray gun.
Connection with adapter
1. Attach the adapter (1) to the
extension element (4) or the con-
necting element (
it through 90° until it locks into
place (bayonet locking device).
Screw the cap nut (3) of the ex-
tension element (4) against the
adapter (1).
2. Connect the spray gun (bayonet
locking device) and screw the
cap nut (2) of the adapter (1)
against the spray gun.
5) and turn



  Verwandte Inhalte für Parkside PFR 28 A2