Soldering Sponge; Soldering - Parkside PLS 48 C1 Originalbetriebsanleitung

Switching off:
GB
NOTE
► After use, always replace the soldering iron
spring
♦ Move the ON/OFF switch
Always remove the plug from the socket when not in use.

Soldering sponge

NOTICE!
► The hot soldering tip
dry soldering sponge
be damaged.
NOTE
► The soldering sponge is used to clean the soldering tip.
► Dampen the soldering sponge before use.

Soldering

Vapours can lead to headaches and fatigue if inhaled.
■ The soldering iron has a rated power output of 48 watts and is
ideal for electronic solders.
■ Its design makes it especially suitable for difficult-to-access and
fine soldering work.
♦ Clean the soldering tip
♦ After cleaning, the soldering tip must be tinned. Tin the hot
soldering iron tip by melting the solder
♦ Guide the soldering tip to the solder joint and heat it.
10
.
must never come into contact with a
. Otherwise, the soldering sponge can
into the "0" position.
on the moist soldering sponge
.
in the coil
.
PLS 48 C1