Dry Mode; Setting The Timer - Blaupunkt MBS07E Bedienungsanleitung

DRY MODE

Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
•
Before using the dry mode, the appliance should be prepared in the same way as for
cool mode, with the air exhaust hose attached to enable the moisture to be discharged
outside.
To set this mode correctly:
•
Press the " " button a number of times until the "Dry" symbol
•
light appears, the screen will appear ''
In this mode, fan speed is selected automatically by the appliance.
•

SETTING THE TIMER

This timer can be used to delay the appliance start up or shutdown, this avoids wasting
•
electricity by optimizing operating periods.
PROGRAMMING START UP
Turn on the appliance, choose the mode you desire, for example cooling, 24°C and
•
high fan speed. Turn off the appliance.
Press the button, the screen will display 1-24 hours.
•
Press several times until the corresponding time is displayed. Wait about 5 seconds, the
•
timer will be active, then "Timer" symbol is displayed on screen.
Press again the "
•
disappear from screen.
PROGRAMMING SHUT DOWN
Under the running of appliance, please press the
•
hours.
Press several times until the corresponding time is displayed. Wait about 5 seconds, the
•
timer will be active, then "Timer" symbol is displayed on screen.
Press again the "
•
disappear from screen.
''button, the timer will be canceled, and the ''Timer" symbol will
''button, the timer will be canceled, and the ''Timer" symbol will
www.blaupunkt.com
'' ;
button, the screen will display 1-24
20